Monster Paint Spray On Clear Traction

click to enlarge
Free Shipping
Your Price: $24.99

Monster Paint Clear Spray-On Traction for Stand Up Paddle Boards is Ultra-Lite, Super Clear and provides Nose Riding Grip. It is Spray-On SUP Traction that gives you the grip and the looks you are looking for. One spray can will coat two Boards and Paddles.


“With a shiny, brand new SUP Board and stylish deck pad on the back half where I paddle from…..what about when I’m riding a wave and need to run up to the nose? Wax…..that gets dirty and all over everything else? NO WAY, I recommend a Spray can of Clear Monster Paint, the non-slip clear texture coating that brilliantly shows the manufactures label, Hawaiian prints, Airbrush colors, pin line and even any stick-on logos and don’t worry about slipping off ever again.” ~Aloha Gerry Lopez


Where can I use Monster Paint Traction?
Use Monster Paint Traction for "Nose Riding" on Longboards, SUP Board and the Paddle Shaft for "Hand Grip". For Sailboard, Kiteboard, Wakesurfing, Towboard, Skimboard and Skateboards. Use on Shortboards as a wax base coat for killer wax bumps and "Hand Grip" for unreal big air tricks.

How many boards will 1 Spray Can of Monster Paint Traction cover?
Surface coverage (using 3 coats each) is 3 Boards or 2 boards and 2 paddles.

What surfaces can I apply Monster Paint Traction?
Epoxy, Fiberglass, Gloss Coat and Sand Finish, Gelcoat, Wood, Carbon Fiber, Aluminum, and most other surfaces.

How do I apply Monster Paint Traction?
Clean surface of all dirt, wax, oil, etc. Spray from a distance of 18" inches using smooth even strokes. Apply 3 lite coats to build up the clear texture for long lasting traction. For more details see directions on back of the can or download “Chuck's Application Tips” below.

How do I clean the surface area prior to appling Monster Paint Traction?
Prep the surface using a Surf Wax Remover or lacquer thinner, and paper towels. All wax, oil, and dirt must be removed to insure proper adhesion.

What is the minimum temperature I can apply Monster Paint Traction?
Apply when the temperature is 50*F (12*C) minimum, 90*F (32*C) maximum.

How long does it take to dry?
Dry to the touch in 1 hour. Hard Cure time @ 77*F is 18 hours, Overnight cure is recommended.

Can Monster Paint Traction be used as a Wax Base Coat?
For Longboards and Shortboards use as a base coat for killer wax bumps and "Hand Grip" for unreal big air tricks.

What’s the best way to keep Monster Paint Traction clean?
Clean Monster Paint Traction with dish soap and water. Scrub with a kitchen brush and rinse soap off thoroughly with clean water.

What can I do to remove Surf Wax from Monster Paint Traction?
Use a citrus based Surf Wax Remover. It will remove the wax but not the Monster Paint Traction.

How long will Monster Paint Traction last?
A 3-coat appliction cleaned and applied properly, allowed 18 hours or more cure time will last for 8 months or more before a touch-up coat is needed.

How can I remove Monster Paint Traction competely from my board?
To remove Monster Paint Traction from the surface of your boards deck or paddle shaft use a Lacquer Thinner, or fine sand paper.

What kind of guarantee does Monster Paint Traction have?
Monster Paint Traction comes with a 30-day money back guarantee.

The Isle Surf & SUP Difference

The Isle Difference

Since 2004 we have been an industry leader in bringing the largest selection of high quality surfboards and stand up boards to market at the most competitive prices possible.

We have been able to do so because of a few simple reasons:

  1. We are a company built from the ground up by surfers and stand up paddlers who have been immersed in the culture our entire lives. As a result we are able to do all board design, R&D and testing in house, in one of the most diverse testing grounds in the world, San Diego, CA. This also means lower prices for you as we don’t have to pay for someone else to do all of this for us.
  2. We focus on manufacturing our boards and selling them directly to our customers which allows us to mark up our boards very little and pass the savings onto you, our customers.
  3. We have partnered with some of the best manufactures in the world to make our products and have chosen the best construction methods and materials in order to create the highest quality boards at the best price possible.
  4. We choose to hand shape our boards and not build our boards in molds as molds are not only expensive but force companies to do large quantities of very limited selection. For this reason we hand shape all our boards which allows us to constantly be improving our shapes and continue to offer a wide range of shapes and sizes to better suit all conditions and riders.

In the end this all translate to you getting a lighter, stronger and more buoyant board with the same look, feel and performance of a traditional polyester fiberglass board for a price that’s hard to believe.

100% Satisfaction Guarantee or Your Money Back

100% Satisfaction Guarantee

If for any reason you are not 100% satisfied with your surfboard or SUP purchase, return it within 30 days from the date of purchase and we will credit you 100% of your original sales amount (including the original shipping charge).

You can even try the board out and return it to us used. All we want is for you to be 100% satisfied with your purchase and to make sure it is the right board for you.

Details: All shipping costs associated with the return are the responsibility of the customer. Refunds issued on a board that has been used will be in the form of a store credit. Limit one return per customer within 6-months. If a new order is placed all shipping costs will apply to the new order.